Mechanism Engineering Models

Actual Cut Section Automatic Gear Box Car

Actual Cut Section Automatic Gear Box Car (internal Gear): Microteknik is Manufacturer, Exporter & Supplier of Actual Cut Section Automatic Gear Box Car (internal Gear) Description : Four or Five forward one reverse gear box with gear operating lever.

Model of Gear Box 3 Forward and 1 Reverse

Model of Gear Box (3 Forward & 1 Reverse) Microteknik is Manufacturer, Exporter & Supplier of Actual Working Model of Power Steering Models of Steering Features: Precisely engineered Less maintenance Accurate design Specifications: 1 Model of Gear Box: 3 Forward & 1 Reverse A Model of Gear Box B Model of Gear Box with Clutch 2 Actual Cut Section Gear box:4 Forward & 1 Reverse A Actual Cut Section Model of Gear box B Actual Cut Section.

Mock Layout of Car Wiring

Actual Cut Section Gear Box

Actual Cut Section Gear Box : Microteknik is Manufacturer, Exporter & Supplier of Actual Cut Section Gear Box The working of automatic gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of automatic gear box are shown in actual working form. This model helps the student to understand the working of the automatic gear box very easily. It is specially made dissectible for demonstration purposes. (4 Forward & 1 Reverse) (a) Actual Cut Section Gear Box Model (b) Actual Cut Section Gear Box Model with Clutch

Actual Cut Section Gear Box Car

Actual Cut Section Gear Box Car (Constant Mesh) : Microteknik is Manufacturer, Exporter & Supplier of Actual Cut Section Gear Box Car (Constant Mesh) Description : Five forward one reverse gear box with gear operating lever Specification : Full size unit prepared from original second hand parts mounted on stand.

Mock Layout Tractor Wiring

Actual Cut Section Gear Box Model

Actual Cut Section Gear Box Jeep (Synchronic Mesh) : Microteknik is Manufacturer, Exporter & Supplier of Actual Cut Section Gear Box Jeep (Synchronic Mesh). Description: Three forward one reverse gear box with gear operating lever. Full size unit prepared from original second hand parts mounted on stand.

Coil Ignition System of an Automobile

Electronic Ignition System of an Automobile

Multi Plate Clutch Working Model

Multiplate Clutch : Microteknik is manufacturer, exporter & supplier of Multiplate Clutch A properly constructed all metallic model mounted on metal base with handle drive arrangement.

Centrifugal Clutch

Centrifugal Clutch : Micro teknik is manufacturer, exporter & supplier of Centrifugal Clutch š…" Working Model The model consists of a drum pulley mounted on the output shaft. The input shaft carrying spring controlled fly weights. The worming can be demonstrated by rotating the input shaft provided with crank handle. The output shaft rotates with clutch action.

Split Muff Coupling

Riveted Joints Wooden Model

Riveted Joints Wooden Models : Microteknik is manufacturer, exporter & supplier of Riveted Joints (Wooden Models) (a) Riveted Joints Triple (b) Riveted Joints Quadruple (c) Riveted Joints Angel Iron & Girder Joints

Belt Drive Single Speed

Girder Models Wooden

Girder Models (Wooden) : Microteknik is manufacturer, exporter & supplier of Girder Models (Wooden) Properly constructed in wood (a) Plate Girder, (b) Box Girder, (c) N. Girder.

Oldhams Coupling

Oldham Coupling : Microteknik is manufacturer, exporter & supplier of Oldham Coupling The properly constructed model is hand Operated, (a) Small To illustrate the transmission between two shafts (b) Big Which are not coaxial. Complete on base.

Rivets Set of Four Metal Model

Rivets Set of Four (Metal Model) : Microteknik is manufacturer, exporter & supplier of Rivets Set of Four (Metal Model) Cup head, pan head, conical head and counter cunk head, set of four metallic models mounted on a base with nomenclature.

Hooks Coupling Double

Hook Coupling Double : Microteknik is manufacturer, exporter & supplier of Hooks Coupling (Double) A Shaft with universal joints at its both ends and with pointers and graduated scales.

Hooks Coupling Model

Hooks Coupling Model Microteknik is manufacturer, exporter & supplier of Hooks Coupling Single, Properly constructed, complete with pointer and scale, graduated in degrees.

Belt Pullley Models

Shafting General Bearing

Tie Rod Joint

Tie Rod Joint : Microteknik is manufacturer, exporter & Tie Rod Joint Properly constructed model with rods and coupler.

Wall Brackets

Rolled Sectional Models

Rolled Sectional Models Set of Four (Wooden ) : Microteknik is manufacturer, exporter & supplier of Rolled Sectional Models A set of four in wood, angle iron, Iron, Channel and Girder

Flexible Coupling

Flexible Coupling Engineering Model Microteknik is manufacturer, exporter & supplier of Flexible Coupling The model is properly made to understand the type of shock absorbing coupling.

Universal Coupling

Universal Coupling : Microteknik is manufacturer, exporter & supplier of Universal Coupling Properly constructed all metallic model.

Bearing

Double Hooks Coupling Experimental Apparatus

Double Hook Coupling Experimental Apparatus : Microteknik is manufacturer, exporter & supplier of Double Hook Coupling Experimental Apparatus Features Low cost, effective teaching. Self-contained. Bench mounted. Two independent Hooke s joints with common shaft. Wide range of shaft misalignment. Input and output shaft rotations. measured by protractor scale. Direct measurement of relative shaft displacements. Inference of relative shaft velocities and accelerations. Range of Experiments To observe the relative angular displacement of the shafts at opposite ends of a single and double Hooke s Joint. To observe the effect of changing the angles between the axes of the coupling(s) and shaft on the relative angular shaft displacements To determine by graphical differentiation the relative angular velocities of the shafts To compare the experimental results with theoretical predictions Description: The apparatus consists of an identical Hooke s coupling at each end of a shaft. The axis of each coupling can be independently varied relative to the main shaft axis. Each coupling has a pointer and protractor scale so that the angular difference between the input and output shafts can be determined for a range of shaft angular positions. A wide variety of angular settings for single or double couplings is possible. The couplings are mounted on a free standing pressed steel base. This equipment is part of a range designed to both demonstrate and experimentally confirm basic engineering principles. Great care has been given to each item so as to provide wide experimental scope without unduly complicating or compromising the design. Each piece of apparatus is self-contained and compact. Setting up time is minimal, and all measurements are made with the simplest possible instrumentation, so that the student involvement is purely with the engineering principles being taught. A complete instruction manual is provided describing the apparatus, its application, experimental procedure and typical test results.

Sellers Coupling

Sellers Coupling Model: Microteknik is manufacturer, exporter & supplier of Sellers Coupling Properly constructed all metallic model.

Swivel Bearing

Cotter Joint

Cotter Joint : Microteknik is manufacturer, exporter & supplier of Cotter Joint An all metallic section cut model.

Claw Clutch Working Model

Claw Clutch Microteknik is manufacturer, exporter & supplier of Claw Clutch Properly Constructed model, one part having sliding groove. Complete on base with operating lever

Ball Bearings Set

Hydraulic Brake Unit With Four Brake Drums

Hydraulic Brake Unit (Four Brake Drums) Microteknik is is Manufacturer, Exporter & Supplier of is Manufacturer, Exporter & Supplier of Hydraullic Brake Unit with Four Brake Drum. Same as above MTS-101057 but with two master cylinders and with four brake drums. One of the master cylinder is suitably Ised. Suitably mounted on heavy wooden base with operating brake pedal and lever.

Disc Brake Model

Disc Brake Model : Miicroteknik is manufacturer, exporter & supplier of Disc Brake Properly constructed model, complete on base with operating lever.

Disc Brake Actual Working

Disc Brake Actual Working : Miicroteknik is manufacturer, exporter & supplier Disc Brake Actual Working. Made from original reconditioned parts. Mounted on a sturdy base.

Air Brake Actual Working

Air Brake Actual Working : Suitably sectionised full size unit. Consisting of original parts such as :- air tank, air booster, brake shoes, brake drums, mechanically operated lever and necessary connections. Completed with operating lever and mounted on heavy wooden base.

Power Brake Actual Working

Power Brake Actual Working model for Engineering Students

Mechanical Brake System

Mechanical Brake System : Microteknik is Manufacturer, Exporter & Supplier of Mechanical Brake System Model. Suitably sectionised, full size unit. Complete with operating lever fitted on a vertical and heavy wooden base. With brake pedal and lever.

Band Brake

Band Brake : Microteknik is manufacturer, exporter & supplier of Band Brake. Consists of a brake drum mounted on a shaft, free to rotate in bearings. A flexible band is wrapped partly around the drum. Brake force can be applied with the help of a lever. Complete on cast iron machined base.

Hydraulic Brake Unit

Hydraulic Brake Unit (Two Brake Drums) : Microteknik is is Manufacturer, Exporter & Supplier of Hydraulic Brake Unit (Two Brake Drums) Unit consists of original but reconditioned components such as master cylinder brake drum complete with brake shoes and brake cylinders, brake pedal and necessary connections. In normal condition the brake drum can be easily rotated by the handle but on pressing the brake pedal, brake fluid in master cylinder is forced in brake cylinders thus expanding the brake shoes and stopping the rotation of drum. Brake drum is sectioned. Finish different colours.

Internally Expanding Brake Model

Internally Expanding Brake : Miicroteknik is manufacturer, exporter & supplier of manufacturer, exporter & supplier of Internally Expanding Brake The model consists of a hollow drum, two shoes are pivoted pins. Braking action can be seen due to application of the force on the cantiIever.

Band and Block Brake

Band & Block Brake : Miicroteknik is manufacturer, exporter & supplier of Band And Block Brake The model is similar to the Band Brake Model but wooden blocks attached to the band.

Hydraulic Brake Unit

Hydraulic Brake Unit : Microteknik is Manufacturer, Exporter & Supplier of Hydraullic Brake Unit. To demonstrate the working of an Hydraulic Brake as used in automobiles and other applications. Consists of a metal disc 4inch(100mm) in dia., which is simulated as a wheel of a car, which is rotated with the help of a motor. Two pads mounted in brackets on each sides act like the brake pads. These pads are connected by tubing to a syringe, simulation of the brake pedal. On tuning the motor on which in turn turns the disc, when the syringe is depressed, the air in the syringe, simulation of brake fluid, it makes the pads go forward and bring the disc to stop. On releasing the plunger the pads go their normal position and the wheel starts to rotate again. The whole unit mounted on a strong wooden base. 4 battery holder with alligator clips included. Operates on 4 batteries, not included. Base: 13 inch(330 mm) x 7 inch(180 mm) x 0.68 Inch (17 mm) Total Height of Unit, upto the Disc Top: 6.5 Inch (165 mm) A preview of the included instructions can be found at the bottom of this listing. Measurements are approximate.

Double Shoe Brake Model

Double Shoe Brake : Microteknik is manufacturer, exporter & supplier of Double Shoe Brake Model. Consists of a brake drum, provided with two levers carrying shoes. A linkage Is used to apply the braking force at the free end bell crank lever. Complete on cast iron machined base.

Crank Drive to Oscillating Link Mechanism

Slotted Link Bar Mechanism

Inversion of Four Bar Mechanism

Single Shoe Brake

Single Shoe Brake : Microteknik is manufacturer, exporter & supplier of Single Shoe Brake The model consists of a brake drum, mounted on a shaft free to rotate in bearings, provided with brake lever, complete on cast iron machined base.

Crank and Slotted Link Mechanism

Action of Cams

Crank Shaft to Slider Mechanism

Two Crank and Linkage Drive Model

Triangular Eccentric Cam

Tri Clover Leaf Cam

Inversion of Single Slide Crank Mechanism

Cams and Followers Set

Peculiar Linkage Drive Model

Mechanism model

Watts Mechanism : Microteknik is manufacturer, exporter & supplier of Watts Mechanism. A very interesting model mounted on base.

Scotch Yoke Mechanism

Four Bar Link Mechanism

Pantograph Mechanism

Slide Crank Mechanism

Slide Crank Mechanism

Pawl and Rachet Motion

Crank and Connecting Rod Model

Friction Wheel Drive

Chain Drive