Hydraulic Machinery And Power Tools

Hydraulic Machinery And Power Tools often utilize fluid power to execute different tasks. These heavy duty equipment work by transmitting hydraulic fluid that is controlled automatically via different control valves. Our selection of Hydraulic Machinery And Power Tools offered under this category features intelligent and energy efficient designs that are best in class. Besides consuming less power, these machines and equipment are also low in terms of maintenance and can work continuously for long hours without much supervision. Thus, these deliver expected performance at extremely low cost.

Product Image

( MTFM-40)

Hydraulic Flow Demonstrator

Price: 100 INR/Unit

Hydraulic Flow Demonstrator: MTFM-40 The flow channel of the Hydraulic Flow Demonstrator is constructed using clear acrylic for visibility and is supported by a floor-standing, metal frame fitted with castors for mobility. The flow channel consists of an inlet tank with overflow and flow stilling arrangement, a rectangular working section and a discharge tank. Control valves and adjustable weirs allow the flow conditions to be varied independently at the entry to and exit from the working section. The working section can be flooded to create a closed conduit or operate partially filled as an open channel. The most important feature of this equipment is the adjustable section of the bed which together with its transition section (ramps) may be raised and lowered using an external actuator while the water is still flowing. This facility affords a striking demonstration of the significance of channel critical depth. DEMONSTRATION CAPABILITIES Closed Conduit Flow Application of the Bernoulli and Continuity equations to converging and diverging flow Effect of gradual and sudden changes in cross section (energy losses) Using a contraction as a flow-measuring device Using a Piton tube to measure velocity / velocity profile Flow through a culvert Open Channel Flow Flow beneath an undershot weir (sluice gate) Flow over sharp-crested, broad-crested and ogee weirs Using hydraulic structures to measure flow in an open channel Effect of changes in upstream and downstream water level Characteristics of clinging, aerated, depressed and drowned napes Subcritical critical and supercritical flow/ depth. Changes in specific energy and control imposed by the minimum energy condition Characteristics of hydraulic jumps Force and energy conditions in a hydraulic jump Flow patterns associated with hydraulic jumps Flow over drop structures / energy dissipation Changes in flow profile in relation to the Froude Number (predicting flow conditions in an open channel) Observation of flow patterns associated with flow around hydraulic structures Velocity of gravity waves in shallow water / Formation of surface waves near critical depth Project work evaluation of user-constructed hydraulic structures TECHNICAL SPECIFICATIONS Maximum operating flow rate: 1.6 l/s A floor-standing flow channel for use with a hydraulics bench Working section 77mm wide 150mm high and 1100mm long Clear acrylic sides for good visibility of flow patterns created Stilling arrangement at inlet to promote smooth flow into the working section Section of bed can be elevated continuously and locked at the required height Discharge tank incorporates flow-control valve for convenience in setting up Total and static heads indicated on multi-tube manometer connected to Piton tubes and static tapings at three locations in working section Piton tubes mounted through bed of channel for ease of priming and height adjustment (can be traversed from floor to roof to measure velocity profile) Transparent scales allow measurement of all important heights and levels Models of hydraulic structures supplied include undershot weir (sluice gate) at the inlet, overshot weir at the outlet, sharp-crested weir, broad-crested weir (also used to create a culvert) and ogee weir Suitable for project work with alternative hydraulic structures (user created) Optional direct reading flow meter to aid setting up of demonstrations

Send Inquiry

Request To Call Back

Product Image

(MTHM-01)

Pneumatic Press Machine

Price: 100 INR/Piece

Pneumatic Press Machine Output(max.) 200...200kg, 300...300kg 500...500kg, 800...800kg 1000...1000kg Stroke of cylinder Standard type:100mm Option:75,150,200,250mm(by order) Operating method H...Dual pushbuttom(Standard type) F...Foot switch(option) Voltage 110AC110V, 220AC220V Optics Sensor (option) Space...No(Standard) Single-point type Four-mirror type

Send Inquiry

Request To Call Back

Product Image

(MTS-684)

Hydraulic Jack Hand Operated

Price: 10 INR/Piece

Hydraulic Jack, Hand operated, Remote control type Hydraulic jacks are of multipurpose utility i.e. application of loads while engaged in field investigation, determination of load carrying capacity of piles in the field, tensioning of wires in pre-cast structures, loading of members of any structure for deformation characteristics etc. The Jacks are supplied complete with manually operated pumping units fitted with Bourdon tube type Hydraulic pressure gauge and a copper connecting tube or rubber flexible Lift of the ram - 150 mm Pressure gauge - (Pressure gauge have normally 200 divisions for fully capacity, e.g. 100 tonne x 500 kg divisions). * 10 Tonne Capacity * 20 Tonne Capacity * 25 Tonne Capacity * 50 Tonne Capacity * 100 Tonne Capacity * 150 Tonne Capacity * 200 Tonne Capacity Hydraulic Jacks, Bottle TYPE Hydraulic Lifting Jacks-Complete with integral Pumping unit. Release valve provided on the base plate. Complete with operating handle.Hydraulic lift - 150 mm and Extension Screw - 150 mm All Jacks are without pressure gauge ,* 5 Tonne Capacity * 10 Tonne Capacity * 20 Tonne Capacity * 25 Tonne Capacity * 30 Tonne Capacity * 50 Tonne Capacity * 100 Tonne Capacity Accessories: Hydraulic Pressure Gauge

Send Inquiry

Request To Call Back

X