trusted seller

Laboratory Equipments

Applicable in industries such as beverage, chemical, medical, pharmaceutical, photographic, printing & lithography and processing, our Laboratory Equipments are manufactured from best material such as glass etc. In this range, we offer bench oven, cooling equipments, heating equipments and rotary vacuum flash evaporator. These are latest technology based and cost effective in comparison to other brands. Further, the laboratory equipment are easy to maintain. We accept large and urgent orders, and assure timely delivery without quality degradation.

Product Image (MT -298)

Water Distillation Unit

Price: 100 INR/Unit

Panel Mounted Borosilicate Glass Boiler with inbuilt heater and Borosilicate Glass Condenser. Complete with stand, Clamps etc. Conductivity of Distilled water produced is less than 1u5 cm1. PH 6-7 suitable for HPLC. Output approx. 2.0 Lt/Hr. Capacity: 2 ltr 4 ltr

Product Image (MTH-118OB)

Bed, Orthopedic

Price: 10 INR/Piece

Bed, Orthopedic CODE: MTH-118OB Functional description: Bed with over bed frame to accommodate any traction or suspension system that may be required for adults for long and short stays in the hospital, providing optimal access for hospital personnel and comfort for the patient. Technical: Steel structure with a minimum diameter of 40 mmArgon welded at the ends Dimensions approx. LxWxH in cm: 200x100x45-75, Polyester powder coated and baked finished, Divided adjustable leg section, capable of reverse trendelenburg function to tract from both sides, with extensible retractile retractor Trapeze handle and chain 4-crank operation back rest, knee rest, reverses trendelenburg and height Bed head/foot board made of ABS plastic, washable and removable; With medical record slot Height adjustable 45-75 cm, Back rest lifting angle 0-82 degree, Knee-rest lifting angle, 0-40 degree, Supplied with I.V. Rod, and drainage bag holder Collapsible type guard rails cross-over Over bed table plate 4 caster wheels, industrial types. 20cm diameter with brakes, wheel brackets made of stainless steel 2 collapsible type guard rails cross-over Aluminum/ Steel alloy traction frame Adjustable length Adjustable distance between the tractions Adjustable strap bar Pull handles Traction weight set Mattress Length and width matched with the bed size of adult hospital bed Thickness min 15 cm High-density foam filling; minimum density of 30kg/m3 Mattress cover made from flame-resistant synthetic fabric (incontinent type) with zips on 3 sides Cover autoclaved up to 110 degrees Celsius Accessories: 1 Accessory set for pulling lower and upper limbs 1 Spare waterproof cover Spare parts: 4 spare wheels 2 mattresses

Product Image (JEQ-5ES)

Shaker, Vdrl

Price: 10 INR/Piece

Shaker, Vdrl CODE: JEQ-5ES Functional description: A device for a Venereal Disease Research Laboratory, where it is used for the Mixing of syphilis testing card, emulsion reaction, and complement fixation Reaction which also be used to blend clinical diagnostic tests requiring gentle agitation. Technical: Large platform 3000x300 powder coated mm can take cavity slides, blood bottles, flasks By use of adjustable roller gaps or clamps Main Unit: Spring Shaking plate Multi shaking plates Flask holders (50ml, 200ml, 500ml,1000ml,2000ml) Motion: Reciprocating/ orbital Plate size min: 300 x 300 mm Shaking width: 25mm Variable Speed: 20 - 200 times /min Digital Speed display Supplied with suitable surge protection equipment

Product Image (MTH-085)

Oxygen Cylinder , Small, Mobile

Price: 10 INR/Piece

Oxygen Cylinder , Small, Mobile CODE: MTH-085 Functional description: Small Oxygen Cylinder for use in hospital environment Technical: 5 liters Oxygen cylinder valve: bull nose, British standard Filling pressure 200 bars Seamless outer wall Beautiful colour combination

Product Image (JEQ-14GD)

Distilling Unit

Price: 10 INR/Piece

Distilling Unit CODE: JEQ-14GD Functional description: Used to produce distilled water, which is used to prepare solutions and stains. Technical: Complete distillation unit made of Supporting stand from ms angle iron powder coated Min 4 litre per hour Conductivity<2.5 µs / cm at 25 C Dry running protection by thermostat Energy saving by distillation of the preheated cooling water. Boiler easily accessible for cleaning. CO2 degassing by the condenser. Stainless steel heating body, boiler and condenser Metal casing with electrostatic powder epoxy coating. inch water supply and discharge connections Supplied with Automatic Voltage Regulator (AVR) Accessories: 1x 8 liters water tank 2x water connections sets Spare parts: 1 spare heating body

Product Image (EM-323P)

Esr Apparatus, Westergren, Stand & Pipettes

Price: 10 INR/Piece

Esr Apparatus, Westergren, Stand & Pipettes CODE: EM-323P Functional description: A system used to measure blood sedimentation in order to determine the Erythrocyte sedimentation rate (ESR) Technical: Stainless steel support with tilting device Macro type with special shutters 10 pipettes model Accessories: 20 pipettes 20 rubber stoppers Consumables: 100 mixing tubes

Product Image (JRS-B8M)

Mixer, Blood Sample

Price: 10 INR/Piece

Mixer, Blood Sample CODE: JRS-B8M Functional description: A device to mix blood samples by gentle rocking. Outer body made from crc sheet powder coated Rollers made from Plastic Variable speed: 3 to 30 revolutions / minute Min 10 tubes drum Adjustable inclination: 0 to 20 Tube size up to 31, 5 mm, length 70 mm Supplied with suitable surge protection equipment

Product Image (JEQ-4OL)

Incubator 40 Ltr, Laboratory

Price: 10 INR/Piece

Incubator 40 Ltr, Laboratory CODE: JEQ-4OL Functional description: A device used to grow and maintain microbiological cultures or cell cultures by maintaining an optimal temperature Technical: Double walled construction. Inner chamber made of stainless steel sheet Outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation. Double walled door with double glass window for observation in the chamber. Min 40 liters Temperature settings: + 40 to + 250 C Natural or forced convection Homogeneous temperature at +/- 2% Stainless steel interior Electronic regulation Safety class 2 Supplied with Automatic Voltage Regulator (AVR) Accessories: 2 shelves

Product Image (MTH-0652)

LAB CENTRIFUGE

Price: 10 INR/Piece

CENTRIFUGE CODE: MTH-0652 Specification: Functional description: Rapid rotating system used to centrifuge biological fluids (e.g., blood, cerebrospinal fluid, urine). Technical: Fitted with well balanced universal motor Digital LCD display shows set time/run time/RPM Brushless induction motor 1x Swing out rotor Capacity: 16 tubes (15 ml) 4x 200ml Sealed cups Tube adapters: 4 x 10ml x 4 7 x 15ml x 4 9 x 13ml x 4 1 x 50ml x 4 Speed from 500 - 4000 rpm Acceleration: up to 2750 g Permanently sealed Self-lubricating ball bearings Steel guard bowl and cover. Swing-out head with trunnions for 4 x 50ml buckets with 50ml buckets (12 No.) and 50ml cushions (24 No.) 4 non-slip suction feet Direct reading tachometer Speed accuracy: +/- 5% Electric timer from 1 to 30 minutes. Electric brake to reduce coasting time of 50% Safety latch to prevent cover from opening until centrifuge has stopped spinning Supplied with Automatic Voltage Regulator (AVR) Accessories : 1 spare rotor

Product Image (MTH-136)

Lab Urinometer

Price: 10 INR/Piece

Lab Urinometer CODE: MTH-136 Functional description: A device for determining urine specific gravity; according to Squibb with steel ballast and glass jar. Technical: Measuring range: 1,000 to 1,060 Accuracy: 0,002 Length: 90 mm Material: glass Supplied with suitable surge protection equipment.

Product Image (MTH-431)

Regulator, Bull Nose Type, For O2 Cylinders

Price: 10 INR/Piece

Regulator, Bull Nose Type, For O2 Cylinders CODE: MTH-431 Functional description: Regulators with adjustable flow rate for O2 cylinders in a hospital environment. Technical: Bull nose type 12 minimum different flow rates positions 50 PSI Output Dial Flow: 0 š“ 25 l/min 3000 PSI Gauge Nozzle at one side Threading with chuck nut to fit on the cylinder

Product Image (MTH-085A)

Cylinder, Oxygen, Large

Price: 10 INR/Piece

Cylinder, Oxygen, Large CODE: MTH-085A 50 liters Oxygen cylinder Valve: bull nose, British standard Filling pressure 200 bars Seamless outer wall Beautiful color combination

Product Image (MT-155M)

Model Isostasie

Price: 10 INR/Piece

Model Isostasie Non-messy: salt water Composition- Hemi cylindrical tank that filled by two types of liquids: - salt water - water-based gel - plastic parts of different colors with a density of about 0.83- two sliding indexes - two scales. The average density ratio (0,818) crust / coat being respected, the vertical movements during the handling are done in the same proportions as the reality. The plastic pieces of different colors make it possible to model different rocks and illustrate the phenomenon of erosion. The white pieces are used to model the melting of a polar ice cap. The graded scale illustrated by the sea level and the different indications of average depth of the continental crust allows making a quantitative study. To study illustrating the phenomenon of melting of a polar cap. To be able to observe the delay effect of the rebalancing, the manipulation carried out in the gel with water base. Density ratio slightly less precise : 0.87. Description- Set of 18 stackable elements of 0.83 density (16 elements of 3 assorted colors simulating the continental crust, 2 white color simulating the ice cap), - 2 removable graduated scales (one with value and one without value) Total height : 380 mm

Product Image (MTS-11006)

Laboratory Heating Equipments

Price: 10 INR/Piece

Laboratory Heating Mantles We are manufacturer and exporter of all type Heating Mantle. Technical Specifications Single Size Wattage Single 50 ml 60 100 ml 60 250 ml 150 500 ml 200 300 ml 300 2 Lit. 450 3 Lit 450

Product Image (MTS-10976)

Laboratory Cooling Equipments

Price: 10 INR/Piece

Laboratory Cooling Equipments: Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. Inner chamber made of STAINLESS STEEL SHEET (304 Grade). Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber. Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. Inner chamber has SS angels for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves. A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. High grade PUF INSULA TION between outer and inner chamber for minimal thermal losses.

Product Image (JEQ-3A)

LABORATORY BENCH OVEN

Price: 10 INR/Piece

LABORATORY BENCH OVENS Microteknik manufactures and supplies laboratory bench oven, mainly used for general drying of samples in the laboratory. Stainless steel is used for making inner body, by applying argon-arc-welding technique. Steel sheet with a novel appearance is used for making exterior body. This equipment has digital display, temperature control protection and microcomputer PID temperature controller with timer function for reliable and precise temperature control. Technical Specifications : Time Locating Range: 1 9999 Min Temp. Fluctuation: ± 0.75oC Capacity: 220 liters Temp. range: +50300oC Rated power heater elements: 2.4 KW, Shelves: 2, Shelf positions; 3 Temperature Resolution: ± 0.10C

Product Image (16)

Rotary Vacuum Flash Evaporator

Price: 10 INR/Piece

With an aim to mark a niche in the industrial arena, we are providing quality manufacture, supply and export of Rotary Vacuum Flash Evaporator. This equipment aid in distillation of liquids by the process of evaporation. It can be used to concentrate, capture and infuse flavors. Our offered product is widely appreciated for its high efficiency, thermostastical control and study construction. This apparatus has an AC spark resistance geared live unit, sped regulator, support stand fitted on S.S rod with jack arrangements, water batch, double coiled glass condenser, laboratory jack, vapor tube and feeding tube with rubber seals. However, our Rotary Vacuum Flash Evaporator can be customized, at our clients demand.

Product Image ( JEQ-5E)

V D R L Rotator

Price: 10 INR/Piece

V D R L Rotator Leveraging on our years of experience, we are manufacturing, supplying and exporting high quality V D R L Rotator. This equipment is widely popular among our clients for its smooth functioning, easy operations and robust construction. Our offered rotator and shaker is broadly used for examination of venereal diseases, blood groups and agglutination in various laboratories. It is also used for combining solutions in small flasks, bottles and beakers. We are offering this V D R L Rotator in 300x300mm dimensions, which is capable to keep bottles, cavity slides flasks by using spring holders. This application works on a set speed of 180 RPM.

X


Back to top