Applied Mechanics Lab Equipments

Portable Wind Vane

Portable Wind Vane: Micro Teknik Avery sensitive and newly designed small size unit which can be easily taken any where in open to find wind direction, with aluminium vane and counterpoise weight freely rotating on cast iron base. Without directional letters

Aggregate Impact Testing Machine

IMPACT TESTING MACHINEMICROTEKNIK are the Best Manufacturer and Suppliers,Exporter Company in India tests Aggregate impact value and Resistance of aggregate to shock or impact. Specifications: Made of plated steel against corrosion, safety locking bar, and built in counter. Cylindrical Measure Machine steel, 75 mm diameter., 50 mm deep. 2 Tamping Rod Galvanized steel, 3/ 8" (9.3mm) diameter, 8" (203mm) length.

Lateral Extensometer

Lateral Extensometer It Is called 15 cm extensiometer. It is made of gun metal and comprises of an accurate hinged ring with stainless steel set screws held rightly by a spring. The extension is on a dial gauge. It Is suitable for 15 cm x 30 cm cylindrical test moulds. IT has a control bar fixed on both ends of the extension rod with screws. When the test specimen has been held by the stainless set screws the control bar is released and the instrument Is in operation. The extension is read, while the test specimen is under compression test, on the dial gauge, which is fixed to the extensometer. The dial indicator which reads to 0.0005 INCH or .01 mm gauge shows the average extension on the sides of the specimen.

Rigidity of Wires

Rigidity Apparatus (Searles Pattern) One can find the modulus of rigidity and Youngs modulus for the material of a wire by Searles method. The 30cm long wire under test is connected to two brass rods about 30 cm long at their mid points by two screws fitted at the ends of the wire. The rods are suspended from hooks. Complete with three test wires and connecting screws.

Besser Convertor Model

Besser Convertor: Micro Teknik The model is much helpful In having clear grasp of Bessmer method of steel manufacture. Ills clearly labelled and colour scheme fully demonstrates the refractory lining. the steel shell Is mounted on a turnlon to demonstratic filling arrangement. the blast system constitutes another Important feature of the model. The complete unit Is mounted on 45x30 cm base board.

Archemedlan Screw

Archemedlan Screw: Micro Teknik Alow lift but continuous flow displacement pump" All metallic model, complete with water reservoir fitted on wooden base. Archimedes Screw is a mechanical device used to lift water from one level to another level. An Archimedes screw was included with helix, or spiral fitted inside a cylinder that is open on both sides. The device is named after the inventor Archimedes, who lived in the 3rd century BC. Archimedes screw was used by placing the lower end of the device under water at a slant and a handle, attached to the helix, is turned. Archimedes Screw was a simple mechanical water pump device that consisted of a hollow cylinder which is included with a continuous screw. By using this screw one could enlarge the cylinder size to form a spiral chamber.

Tube Well Model

Tube Well Model: Micro Teknik Complete on 30x30x50 cm box base, showing main stages of the earth, pipe line, motor and pump etc.

Sliding Wedge Gear

Sliding Wedge Gear MicroTeknik are offering a wide range of Sliding Wedge Gear.

Micrometer Contract on Gauge

Micrometer Contract on Gauge: Product Description Made of nickel-plated brass with ratchet top. Accurately machined stainless steel rod with range 0-25 x 0.01mm. Lock type. For outside measurements up to 25mm. Supplied in plastic case. Precision: 1/100mm.

Snow Gauge

Electrically Heated Rain and Snow Gauge Measure the total amount of precipitation from both rainfall and snowfall with the heated tipping bucket

Centrifugal Pump Iron Base with Pulley

Centrifugal Pump Iron Base with Pulley An all metallic section cut small size demonstration model made of cast aluminium parts. Rotator presses water outward by centrifugal action. Complete on a cast iron base with a pulley. An all metallic section cut small size demonstration model made of cast aluminium parts. Rotator presses water outward by centrifugal action. Complete on a cast iron base with a pulley.

Radial Turbine Pump

Radial Turbine Pump It is an all metallic properly constructed model, the impeller is surrounded by a number of stationary vanes one side is covered with plexi glass showing internal details, complete mounted on cast iron base. Height 300 mm approximately,

Water Wheel

Water Finder

Tissue Culture Equipments

Structural Lab Equipment

StructuralStructural Lab Equipment: We are manufacturers of structural analysis equipments and we are supplied all equipments of structural lab in all famous institute and engg colleges through out India. Below mentioned is. The Three Hinged Arch Apparatus manufactured, exported, imported and supplied by our company, consists of a curved beam mounted on two fixed supports and usually featuring the so-called crown hinge at its crown. The hinges on the two fixed supports absorb vertical and horizontal forces, and are known as abutment hinges. Their connecting line is the springing line. The crown hinge renders the system statically determinate. Lab Equipment: We are manufacturers of structural analysis equipments and we are supplied all equipments of structural lab in all famous institute and engg colleges through out India. Below mentioned is. The Three Hinged Arch Apparatus manufactured, exported, imported and supplied by our company, consists of a curved beam mounted on two fixed supports and usually featuring the so-called crown hinge at its crown. The hinges on the two fixed supports absorb vertical and horizontal forces, and are known as abutment hinges. Their connecting line is the springing line. The crown hinge renders the system statically determinate.

Compression of Coiled Springs

Compression of Coiled Springs: A coil spring compressor is a tool that is used to safely compress a spring for removal or installation on a vehicle. For example, when servicing the suspension system of a car with coil springs, a coil spring compressor squeezes the spring coils to reduce their height. This gives enough room to slide the spring out of the control arm. It also prevents the spring from shooting out when the lower ball joint is disconnected. Coil spring compressors may be screw-, ratchet-, or hydraulically-driven, and may come with yokes that prevent slippage and damage to springs. They differ in the maximum compressional force they can exert (known as the maximum jaw loading) and the size of springs they can accommodate.

Tortion Apparatus Searle's Type

Tortion Apparatus Searles Type: Horizontal bench pattern. The wheel moving on ball bearing is provided with a chuck to hold the rod under test. The other end of the rod is clamped tightly to bracked. The points and scales are gradually in single degree and can be clamped at any position. Complete with ribbon, hook and rods of steel and brass, but without weights. rigidity

Bending Moment Apparatus

Bending Moment Apparatus: Consisting of a well seasoned wooden beam 180 cm long hinged at a distance of 60 cm from one end, spring balance is with adjusting screw so as to compensate the initial extension of the spring and to keep the beam horizontal under any load. Complete with U shaped sliding weights and two knife edge end supports on stands.

Atwood Machine

Atwood Machine: Consisting of a full length brass upright graduated pipe upto 200 cm, to be mounted vertically near wall by means of two brackets. A light weight accurate frictionless wheel of 10 cm ala is mounted at its top. Three adjustable clamps move along the rod, upper carrying a ring and lower carrying a plate form and the third on is equipped. with electric release system. The unit is all metallic and complete with two set of failing weights and rider weight.

Compression and Extension of Springs Apparatus

Combined Compression and Extension of Springs Apparatus : wall mounted vertical bracket houses two independent mechanisms side by side for testing tension and compression springs. left hand side tests tension springs whilst the right hand side tests compression spring. set of springs is supplied which allows the student to test the relationship between applied load and extension for both types of springs.springs are easily installed and the integral deflection scale ensures accurate monitoring of the deflection during spring loading. set of calibrated weights is supplied with this apparatus. Weights are attached to the load hanger for tension testing and added to a platform for compressive testing.

Young's Modulus Apparatus

Youngs Modulus Apparatus: Comprising of two brass frames with specially designed sell centering chucks, connected by a pivoted link carrying a sensitive spirit level and a standard micrometer head reading to 1/100 mm. Supplied in case with a ceiling bracket, constant weight and suitable wire. Without weights.

Kater's Reversible Pendulum

Katers Reversible Pendulum: Consisting of 120x1.2 cm brass bar with pointed ends, carrying two sets of adjustable knife edges and two large and small brass weights. Two similar hardwood weight$ are provided. Complete with cast iron wall bracket.

Bar Pendulum or Compound Pendulum

Bar Pendulum or Compound Pendulum : Consisting of Iron bar 100 cm long bored at equal interval, with two removeable knife edges and a wall bracket.

Tortion Apparatus Vertical Type

Tortion Apparatus Vertical Type: A steel frame mounted on heavy cast base with levelling screws. Upper end of the rod under test is held in a centring chuck and the lower end is clamped into the axis of a tortion. drum which can be rotated by putting load in the scale pan passing over two frictionless pulleys. Freely sliding three circular scales graduated in single degrees can be clamp d at any position. Three pointers for clamping to the test rod are provided. Complete with three test rods, strings, and two scale pans, but without weights.

Maxwell Vibration Needle

Maxwell Vibration Needle: For experiment on rigidity. Two solid and two hollow cylinders each 10 cm long accurately fitting the bore of a hollow brass tube 4() cm long are provided. The tube is also fitted with wire chuck and mirror, graduated scale and verniers on sliding weights. Complete with ceiling attachment.

Hook's Law Apparatus

Hooks Law Apparatus: Consisting of 30cm long mirror scale, spring, slotted weights with hanger and pointer. complete on heavy tripod stand.

Centrifugal Force Apparatus

Centrifugal Force Apparatus: Equipment Specifications & Manuals Operational Manual Speed Control Tachometer

Feltcher Trolley

Feltcher Trolley: All metal, capable of being assembled and dismantled easily. A large metal trolley with removeable cylindrical weights is fitted with wheels which run with very little friction on a track of two steel rods 150 cm long.The rail rods are held in heavy clamps which are fitted in two vertical rods, mounted on cast iron feet. The steel vibrator is fitted to one of the vertical rods and frictionless pulley to the other. The unit is capable to verify the law under different conditions. Complete with cord, scale pan, brush and ink.

Shear Force Apparatus

Shear Force Apparatus: Consisting of two knife edge supports on stands and a seasoned wooden bar 180 cm long which is hanged at one point of its length. The dynamometer is with an adjusting screw for restoring line of beam under load conditions. Complete with three sliding Ushaped weights.

Wheel And Axle Simple Form

Wheel And Axle Simple Form: Comprising two polished wooden wheels with grooves 7.5 cm and 12 cm in diameter respectively, fixed rigid together and mounted on steel centres on wooden base. Complete with cord and hooks. Without weights.

Crony Brake Dynamometer

Crony Brake Dynamometer: Consisting of a two blocks of wood clamped together with a pulley in the center. The pulley is fitted to shaft moving on the ball bearings. A lever bar is attached to one of the blocks carrying a weight hanger at the outer end. Aspiring balance is also fitted to measure the load factor developed with the tightening of the block with wing nuts and spring.

Bell Crank Lever

Bell Crank Lever Bell Crank Lever on Angle Iron Base with Weights

Shear Legs Apparatus

Shear Legs Apparatus: The tripod features high level supporting struts so as to ensure that the leg bracing does not impede the access to the confined space. The tripod is rated for goods lifting to 500 kgs and weighing only 20 kgs is one of the lightest 500 kg rated tripods available. To support the Didsbury winch there is also a specifically designed option that has two high level supporting struts and one lower where the winch can be rested to give more control for the top man.

Jointed Roof Truss On Wheels

Jointed Roof Truss On Wheels: The Apparatus Is About 1.2 Meter In Length And Strongly Constructed In All Metal, One Leg Is Fitted On A Immoveable Bracket And The Other On Rollers. Spring Balances Show Tension On The Rod And The Compression On Rafters. Complete With Specially Made Dynamometer, Cahin And Pan, But Without Weights.

Compound Wheel And Axle

Compound Wheel And Axle: Student quickly grasp a clear understanding of the mechanical advantage of the wheel and axle using this all mettalic smooth running apparatus. The wheel is of 35 cm dia and axle in 3 steps of 20, 10 and 5 cm reducing diameter supported on ball bearings in iron brackets. The base is provided with holes to fix the apparatus on wall. Complete with snatch pulley block, cord and hooks. Weights are not included.

Wheel And Differential Axle

Wheel And Differential Axle: All metal wheel of20cm diameter.and the axle is in two steps of 10& 5 cm respectively. A steel axle passes through the centre of the wheel which is mounted on ball bearing in cast iron brackets reducing friction to minimum. The base has holes to fix the apparatus on wall. Complete with snatch pulley block, cord and hooks but without weights

Coil Friction Apparatus

Coil Friction Apparatus: It consists of aluminium drum and three frictionless pulleys mounted .on wooden board 60x75cm. in size. The pulleys Can be fixed to give a lap of 1/4 or 3/ 4 full circumference of the drum, complete with cord and two scale pans, but without weights.

Lever Apparatus

Lever Apparatus: Consisting of an aluminium graduated beam fitted into a pivoted stirrup and spirit level on a metal base, the top of the beam is provided with notches all along for hanger carrying weights. With two set of brass slotted weights each set contraining four weight and one hanger of 20 gms.

Deflection of Beam Apparatus

Deflection of Beam Apparatus: Apparatus consists of 4 panels of a PRATT truss, each panel being 40cm in horizontal direction and 30cm in vertical direction. Load can be applied on each panel point. All tension members are provided with detachable springs so as to obtain appreciable deformation of the member. Direction of the diagonal members may be changed . Apparatus can be used to illustrate visually the nature of forces set up in various members of the Truss. Apparatus is supplied complete with a supporting stand an d a set of weights.

Friction Slide Apparatus

Friction Slide Apparatus: It Is very Interesting to study different laws of friction with It. Comprising of a 75x15 cm. wooden board and a frictionless pulley at one end, a scale pan with the following accessories but without weights. 1. One set of three wooden carriages with different bottom surface (Wooden, glass and/iron). 2. One carriage with frictionless rollers. 3. One set of Three different surfaces for friction board-a glass plate, a plywood and felt cloth. .

Structural Mechanics Apparatus

Structural Mechanics Apparatus: It is very easy to form different trusses with the given material and find out stress in different members. The following fourteen types of models can be easily constructed :- 1. Single Cantilever 2. Single Cantilever with four members, 3. Simple Roof Truss 4. Roof Truss with Angled Tie Rods (Roof Truss A) 5.A Composite frame work (four in one frame) 6. King Post Roof Truss. 7. Standard Roof Truss (Roof Truss B) 8. Roof Truss With Loads or Standard Roof Truss. 9. Mansard Roof Truss. 10. Island Roof Truss. 11.N Type Girder 12.Warren Girder, 13. Framed Arch, 14. North Light Roof Truss Details of Accessories :- a. Stand and cross bars (4 bars &8 stands) 4 sets b. Brackets fitted with stands. 4 only. c. Hinges (different) 22 only. d. Hinge Holder Hooks. 8 only. e. Cantilever rod with top caps. 2 only. f. Member rods (sizes marked) 37 only. g. Cap Screws (extra). 6 only. h. Weight hanger with platform. 8 only. i. Weight platforms extra. 2 only. j. Slotted weights 1 kg. 10 only. k. Spring balances (2 of 20 kg. 2 of 10 kg. (4 of 5kg.) 8 only. I. Chains short and long. 6 only. m. Boss Brackets. 2 only.

Worm And Worm Wheel

Worm And Worm Wheel: An all metallic self contained apparatus useful for demonstrating the efficiency of worm and wheel and also the principal of work. Consisting of a machine cut worm gear of 25 cm diameter, carrying a metal drum of 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm diameter pulley. The whole arrangement is fixed on heavy cast iron bracket capable to be fixed to a wall. Complete with effort pulley, string and hooks but without weights. A) Single Purchase b) Double Purchase c) Tripple Purchase

Combined Inclined Plane and Friction Slide

Inclined Plane: The convenience and versatility of this unit has made it very popular. It consists of a 15x60 cm. wooden board with glass top hinged on an Iron base to which a sector with graduated arc and vertical scale Is provided. The plane may be clamped at any angle upto 45 degree. A 5cm dia frictionless pulley Is attached to the end by means of a clamp adjustable to any necessary position. Complete with brass roller, cart and pan but without weights.

Cranked Compound Lever

Cranked Compound Lever: All Metal Parts, Mounted On Wooden Base With Spring Balance And A Set Of Slotted Weights.

Law Of Moments Apparatus

Law Of Moments Apparatus: A Well Balanced, Machine Turned Aluminium Disc Rotating At About Its Axis And Can Be Clamped On A Tripod Stand In Vertical Plane. The Disc Moves On Ball Bearing And Has A Number Of Holes, Two Pins Carrying Scale Pans May Be Inserted Into The Holes At Any Desired Place. Complete With Horizontal Graduated Mirror Glass Scale And Plumb Line.

Screw Efficiency Apparatus

Screw Efficiency Apparatus: Consists of a self contained wall bracket with a steel screw of 3 cm diameter. The screw has 5 TP.I. V type pitch. Complete with large force pulley two jokey pulleys, hooks and cords. Weights are not included

Bending Of Beam Apparatus

Bending Of Beam Apparatus: It consists of a brass beam 9 mm square one meter long resting on the two knife edges fixed on heavy stands at the bases of which are fitted levelling screws. Acentral knife edge with hanger rests on the beam at the top of which is provided a pin. Complete with a cast iron slotted weights set having two weights of 1 kg, two weights of 1/2 Kg and a hanger of 1 Kg.

Geared Jib Crane

Geared Jib Crane: Strongly built frame mounted on a heavy case iron base comprising of single and double wheels. The gears are machine cut and the jib is 1.2 meter high and tapered at both ends, the machine is capable of working either single or double purchase. Complete with cord and hooks. Without weights.

Simple Jib Crane

Simple Jib Crane : Consisting of a tubular compression balance pivoted about an axis fitted to the base. The tie chain has an adjustable angle bracket and fitted with a 10 kg extension balance. Complete on wooden base with 1.2meter jib without weights.

Rope Brake And Dynamometer

Rope Brake And Dynamometer: Consists of a cast iron truly machined wheel of 45cm. dia with a groove. The steel axle is mounted on ball bearings to minimise friction and assembled on a sturdy wooden frame. Provided with an extension balance, rope and a set of slotted weights and hanger.

Pulley Demonstration Set

Pulley Demonstration Set: Almost every kind of pulley experiment can be demonstrated with the help of this equipment .It is very much interesting and of educational value to students, comprising of wooden polished base of 100x20 cm size with two metal supports, and a horizontal bar having eight adjustable collars with hooks from which pulleys can be suspended. The following accessories are provided with the unit. Single pulley with two hooks 7 Slotted weights 10 gm 3 Pulley tripple long 2 Slotted weights 20 gm 3 Pulley tripple parallel 2 Slotted weights 50 gm 2 Wheel and axle 1 Slotted weights 100 gm 7 Capston. 1 Slotted weights 200 gm 4 Slotted weights hanger 50 gm 7 and 20 meter cord. Slotted weights and hangers are made of iron and duly nickelled.

Screw Jack

Screw Jack: All metallic construction accurately machine cut screw with a pitch of 5 mm carrying double flanged turn table of about 20 cm diameter. Fitted on a heavy cast iron base and complete with two adjustable pulleys, cord and hooks. Weights are not included.

Compound Lever

Compound Lever: Comprising of two iron beams connected to each other and fitted on two different stands, well balanced with a scale pan. All metal parts fitted on wooden polishe base. Complete with 1 kg. weight and a physical iron nickelled weight box 1-50 gms.

Winch Crab Single

Winch Crab Single: The crab and winch handle in its simplest form is a simple application of the mechanical principle of the wheel and axle, the handle representing the wheel and the crab or drum the axle. It is used for raising small loads of earth, etc., from deep excavations, and consists of two upright posts, a round wooden drum, through the centre of which an iron rod is passed, this being cranked at one end to form the winch handle, and two iron straps bent into shape to form bearings in which the iron rod can be made to revolve. But few hoisting machines are so simple as to comprise only the winch handle and drum. The power gained would be totally insufficient for lifting heavy loads. In the single-purchase crab (Fig. 227) the first advance on this device occurs. The winch handle is not put on the same shaft as the drum, but on another lying parallel to it, and the two shafts are geared together by means of toothed wheels, a small one actuated by the winch handle directly actuating a large one on the same shaft as the drum.

Triangle And Parallelogram Of Forces Apparatus

Triangle & Parallelogram Of Forces Apparatus: The offered range of Parallelogram of Forces Apparatus is manufacture by our highly skilled professionals from quality assured components at our hi-tech manufacturing unit in sync with the set industry standards. The forces apparatus is highly demanded in the market due to its perfect finish, sturdy construction and corrosion resistance. Our clients can avail this range in various designs and sizes as per their requirements. Features: High durability. Precisely designed. Accurate dimensions. Specifications: One hanger weight: 50 gm. Size: 60x50 cm.

Polygon and Triangle Of Forces Apparatus

Polygon & Triangle Of Forces Apparatus: Category : Apparel Machinery. Packing Details Status Approved Search Keywords : Polygon Of Forces Apparatus. Detailed Product Description: Consisting of wooden board of 75x70cm. size, provided with two wall brackets and four adjustable frictionless aluminium pulleys, complete with four one kilogram weights and one scale Pan.

Parallelogram Of Force Apparatus

Parallelogram Of Force Apparatus: A wooden board of 50x60 cm. with wall brackets, two frictionless clamp pulleys, and three set of slotted weights of iron nickelled each set containing four weight and one hanger of 50gms

Law Of Conservation Of Mass

The apparatus consists of an attractive and durable curved track grooved in the middle on which rools a steel ball, can be clamped on the table. A levelling screw is provided under the base to make the lower end of track horizontal. The track carries an adjustable automatic release system to permitting of the ball at exactly the same starting point for multiple runs. An adjustable support attached to base holds the second ball directly in the path of the first, or displaced from the path to cause the collision to occur at different angles and at different distance from the end of the track.

Polygon Of Forces Apparatus

Polygon Of Forces Apparatus: Consisting of wooden board of 75x70cm.size, provided with two wall brackets and four adjustable frictionless aluminium pulleys, complete with four one kilogram weights and one scale Pan.

Universal Force Table

Universal Force Table We are manufacture and exporter of all type Engineering lab Equipment , Mechanical lab Equipment for engineering students and College, For experimentally verifying the laws of triangle, parallelogram and polygon of forces. Comprising of a circular 40 cm. diameter aluminium disc, graduated into 360 degrees. Complete with levelling screws, clamping device to fix the table at any desired angel, five sliding clamp pulleys, central ring, string and five sets of iron. nickelled slotted weights, each set containing nine weights and one hanger of 50gms. each.

Link Polygon Apparatus without Weights

Link Polygon Apparatus Without Weights: The apparatus is provided with five linkages and connectors, having hooks to which pans are hung.These are fixed between two pulleys around which rope is run to connect to two extension type spring balances. The unit is very useful for the study of arches, abutments and piers. The wooden rectangular beam is fitted with scale.Without weights.