Autoclave Rectangular

Product Description

AUTOCLAVE RECTANGULAR
Micro Teknik is manufacture, exporters & suppliers of : AUTOCLAVE RECTANGULAR
 Inner Chamber is made up of thick non-magnetic steel of 304/316 quality
and jacket is made out of rolled steel.
 Single door made of rolled steel lined with S.S. sheets has radial locking
system.
 All units are hydraulically tested upto 40psi.
 The space between outer cover made of thick rolled steel sheet and the
steam jacket is filled with asbestos sheet or glass wool to minimize thermal
losses.
 Boiler is made of thick stainless steel sheet and is located under the sterilizer.
 Unit is fitted with water level indicator, safety valve, pressure gauge, water
inlet and drain valves.
 Unit is also fitted with low-water level cut-off device and automatic pressure
control device.
 Rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.
 The door cannot be opened when chamber is under pressure.
 Two separate valves are provided for evacuating steam from inner chamber
and jacket, as and when desired.
 Fitted with safety valve as a safety device.
 Drain valve is fitted at the side bottom for easy draining/cleaning.
 Fitted with vacuum breaker to break vacuum in case of formation of vacuum
due to steam condensation.
 Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.
 To work on 440 volts, 3 Phase, A.C. Supply.