Pharmaceutical Lab Equipment

COUNTING TRAY, TABLET

COUNTING TRAY, TABLET CODE: MTH-46 Specification: Functional description: A tray to facilitate counting tablets. Technical: Base made of aluminum Sturdy handle Plastic pill counting tray Tray with clear lip handle and two corner spouts Dimensions 3.5 x 21 x 16cm Accessories: plastic spatula (1.5 x 14 cm)

Protected Led

Protected Led Red LED LED in series with a protection resistor Rugged in unbreakable polycarbonate Convenient support housing The safety banana cords are connected to the side of the housing, allowing the front of the cords to be removed for a better fit readability of the fixtures. Dimensions: 100 x 70 x 33 mm.

Microprocesser Fribility Test Apparatus

Microprocesser Fribility Test Apparatus Measures the tendency of tablet to chip or breakdown to pieces when held under mechanical stress. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproductibility Instument is equipped with 4 line alphanumeric LCD display with backlit and 16no of soft touch membrane type keys. Friability tester can be operated using only one or two drums. The rotational speed of drums can be set at different speeds (20-60rpm). The samples can be loaded conveniently without removing the drums and after the test completion the samples are automatically unloaded to the collectionn tray. To eliminate the manual input of weight of samples, the facility of connecting a weighing scale is also available. When weighing scale is connected the weight of sample is automatically recorded to the instrument from weighing balance. The test can be performed in two different modes Time or Count mode. The instrument stores the test parameters, readings and results simultaneously inn the memory which are retained even after the power is switched off. Provision is also been made for attachment of a printer so as to provide hardcopy printouts of test data, including time, date and calculated results. Specification: Test Methods : Time Count Mode. Speed Of Drums : 20-60 RPM. No Of Drums : 2. Display : 20x4 Alphanumeric Lcd. Keyboard : Soft Touch Membrane Keys, Alphanumeric Mobile Keypad. Counter : 1 TO 9999 Rotations. Timer : 1 SEC TO 9HRS 59MIN 59 SECS. Type Of Drive : Direct Drive With Stepper Motor. Printer : Attachment Of RS232 Printer With Serial Interface. Electrical Supply : 230V AC± 10%, 50/60HZ, 44VA. Advantages : Microprocessor based, easy to use. Complies with USP, IP Specifications. 20 x 4 line alphnumeric LCD display with backlit. 16 soft touch membrane type keys. Independent programmable setups for Time Count mode with storage. Password protected user access. RS232 printer attachment facility. Automatically calculates percentage friability. Loading and unloading of tablets without removing drums. Power failure detection facility. User friendly operation with menus current status indicators.

Membrane Filter Holder- All glass

embrane Filter Holder- All glass Borosilicate Glass, with Sintered disc for membrane support and aluminium duck clamp. A: Membrane Filter Holder - All Glass. For Membrane diameter 47mm. Funnel Capacity 300 ml, Flask Capacity 1000 ml. B: Membrane Filter Holder - All Glass. For Membrane diameter 25mm. Funnel Capacity 35 ml,Flask Capacity 250 ml.

Sonicator Bath And Ultra Sonic Cleaner

Sonicator Bath And Ultra Sonic Cleaner The characteristic feature of ultrasonic cleaning is that the mechanical energy in the form of High Frequency, High Intensity, sound waves are irradiated in the cleaning liquid. This results in the build up & collapse of large number of vacuum bubbles throughout the liquid. This phenomenon is known as Cavitation. It is responsible for special scrubbing action which ensures quick & thorough cleaning of all the immersed surfaces ( areas) that would otherwise be impossible to clean. By and large any kind of contamination can be cleaned by Ultrasonic. The fundamental point is that contamination is removable, Ultrasonics is more likely to do a thorough and probably faster job without causing any damage to the material than any method. Capacity : i) 1 Ltr. ii) 5 Ltr. iii) 8 Ltr.

Electrophoresis Apparatus

ELECTROPHORESIS APPARATUS : EM-40 It is required in Biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes. It is meant for protein characterization. The unit is joint less, moulded of transparent Poly carbonate to avoid leakage. Complete with Acrylic cover. Supply Complete with standard accessories : Comb 9 walls š“ 10 Teeths (Set of 2 Pcs.). Comb 11 walls š“ 12 Teeths (Set of 2 Pcs.). Comb 13 walls š“ 14 Teeths (Set of 5 Pcs.). Casting Tray, Size 7x7cm (Set of 2 Pcs.). Electrode Set (Set of 2 Pcs.).

Radiant Heat Digital Type

Radiant Heat Digital Type (Cat No. - EM-28B) Radiant Heat Digital Type : (Mark IV) with Digital chronoscope. Same as mark-I, but with foot switch & digital time interval counter.

Analgesiometer .

TAIL FLICKER Type Analgesiometer : It is a tail flicker type analgesiometer (mark -I). It provides pain stimulus by heated Nichrome wire in a rat tail to determine analgesic effect of drugs. Complete with one spare element to work on 220V AC.

Stimulator .

Stimulator Stimulator (Student type) : 0.25 pulse per second to 200 pulse per second in 11 steps. Pulse width selectable 1ms and 2 ms. Operable on 30V. Modes: Internal pulse mode External pulse mode Single pulse mode Stimulators (senior type): Model : EM-38(A) 1 pulse per second to 10 pulse per second in 10 steps multiple of 0.1, 1 and 10. Continuous variable volt from 0-3V in multiple of 1 and 10. Internal pulse, external pulse and single pulse mode.

Actophotometer .

Actophotometer It consist of six built in photo senser and 4 digit digital counter to indicate the locomotor activity. It measures the spontaneous and indicated activity with digital totalizer. It also incorporates electric shock of upto 100 volts for activating rats. The stimulus is variable from 0 to 100V & indicating on meter.

Eddys Hot Plate

Flash Point And Fire Point Apparatus

Metronome .

Metronome : (EM-38M) Metronome : Electronic apparatus for different sound output, Beats per minutes 40-50 interval of 2, 60-70 interval of 3, 70-120 interval of 4, 120-150 interval of 6 select able with accent 1 to 9.

Electro Convulsometer

Electro Convulsometer : Electro Convulsometer: The instrument provides 50 Hz stimulus current which can be adjusted 0.15 mA to 330 mA in discrete steps for producing minimal and supra maximal seizures required in the assaying of anti-epileptic and anti convulsant drugs. The application of stimulus current can be controlled by an electronic timer from 0.1 second to 1 second in steps of 0.1 to 3 seconds in 11 steps. An L.E.D. indicates the duration of stimulus.

Vertical Slab Gel Electrophoresis Apparatus

Vertical Slab Gel Electrophoresis Apparatus (Cat No. - EM-42) Vertical Slab Gel Electrophoresis Apparatus is made out of thick perspex sheet with fixed upper and lower buffer tanks with 1 comb, 3 spacers, 1 plain glass plate, 1 notched glass plate, clamps electrode terminals & platinum electrodes of 99. 9% purity.

Histamine Chamber

Histamine Chamber Histamine Chamber is a compact Histamine aerosol apparatus. Acrylic box with nebulizer. Sphygmomanometer and chloroform bellows.

Pole Climbing Apparatus

Pole Climbing Apparatus Specification of Pole Climbing Apparatus : Outer chamber made of thick plywood sheet with an observation window and inner animal chamber is made of clear acrylic sheet bottom of which is provided with chrome plated brass bars. A shock for controlled duration of 200V AC 50Hz single phase - 0.2 ma is builtin and is controlled by builtin 11 position solid state timer up to 30 seconds. Output for connection to kymograph or recorder has been brought out as terminal. An animal dropping removal tray has been provided for keeping the equipment clean.

Power Supply

Perimeter .

Perimeter Used to measure the peripheral field of vision. The apparatus comprises of a calibrated arc, revolving chart holder. The object carrier which moves over the arc, contains five colours and five apertures of different diameter, calibrated scale. At the back of the arc arrangement is provided for fixing of chart which has concentric circles corresponding to the degrees of arc. Adjustable chin rest. All fitted over a sturdy base with receptacle for keeping charts. For table top use. Completed with 100 charts.

Digital Viscometer

Ir Moisture Balance

Rota Rod

Rota Rod: Used for determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice. Digital counter to count the time of dropping of the rat. Consisting of compartments of 75mm width each with a rotating rod of 25mm diameter having speeds of 5 to 50 R.P. M. with time interval counters in each compartments:- Two Compartments Three Compartments Four Compartments Five Comparments Six Compartments

Paper Electrophoresis Apparatus

Paper Electrophoresis Apparatus (Cat No. - EM-41) Paper Electrophoresis Apparatus : (Horizontal Migration Cell) is made of transparent, acrylic plastic sheet. Platinum Electrodes of 99.9% extend through the entire width of the buffer compartment. It can accommodate six paper strips of 4 cm width or paper / sheet upto 28 cm width on removable special strip placed on the bed or the chamber.

V Cone Blender

V Cone Blander : The rotating shell V-Type blenders are used only for dry mixes and have no packing glands(seals) around shafts entering the chamber to cause potential problems. Modifications such as the addition of baffles to increase mixing shear have been made to these type of blenders. Machine to work on 220V AC 50 Hz single phase. Salient Features : Minimal Attrition when blending gragile granules. Large-Capacity equipment available. Easy to load and unload. Easy to clean. Minimal maintenance.

Cage Metabolic

Cage Metabolic Specification : Floor Area : 200 cm2 (31 in.2) Chamber Volume : 2600 cm3 (159 in.3) DimensionsCage : 32L x 25W x 36.5H cm Vertical Support Rack : 126L x 50W x 187H cm Horizontal Support Rack : 178L x 63W x 129H cm

Tablet Making Machine

Tablet Making Machine (Hand operated) : Useful for making tablets upto 100 mg. Size of punch & die of 9 mm. Automatic compression and ejection device has been provided, actuated by revolution of the wheel drive. Feed and removal of tablets has also been made automatic. Eccentric pressure system has been applied for easy setting of thickness and hardness of tablets. A stainless steel hopper has been given. The unit has been mounted on a mild steel fabrication. Completed with one die and punch set made of chromium steel.

Colloidal Mill

Colloidal Mill: It has excellent function in superfine dispersing, emulsifying, homogenizing and complex mixing etc. After grinding, the particle size of materials processed will be reduced to 3-50 microns and the homogeneity more than 90%. It is an ideal equipment for superfine complex processing of corpuscles instead of such as homogenizer, ball grinding mill, three-roller mill, agitator etc, but is several times more efficient than those above. It may be used widely in various processing industries such as food-stuff, pharmaceutical, chemical, cosmetic, light and plastic etc. Machine to work on 220V AC 50 Hz single phase.

Tablet Polishing Pan

Bulk Density Apparatus

Bulk Density Apparatus : (P-B7) To determine the density of the powder graduated cylinder holded in clamps moves through motor up and down direction at a frequency rate between 28/32 cycles per minute through a distance of 5-6 cms. which strikes on a cushion fitted on the platform. A timer is provided to set the duration. Bulk Density Apparatus : (P-B7A) With digital preset revolution counter. The instrument will stop after setted revolutions.

Bottle and Liquid Filling Machine

Bottle And Liquid Filling Machine P-B9 Bottle / Liquid Filling Machine : A sturdy and heavy unit made of CRC sheet mounted on a heavy angle iron duly powder coated. Capacity of output of water is adjustable through cam system knob provided from 50 ml. to 300ml. It can be operated in two ways:- Hand operated. (P-B9M ) Motorized (Semi Automatic) operated.

Mixing Vat With Stirrer

Mixing Vat With Stirrer : (P-M4) Mixing Vat with Stirrer : A 3 litre capacity vat with lid made of stainless steel sheet fitted on a mild steel stout stand of circular shape provided with rubber feet. A suitable shaft with blade for stirring provided on a suitable stand with height adjustment arrangement. A fractional H.P. Motor workable on 220V AC 50Hz single phase, indicator, plug, and cord provided.

Tablet Hardness Tester

TABLET HARDNESS TESTER : P-T5B Complete with dial gauge. Powder coated machine parts. Useful to take quick reading on dial, more accurate in grammes. All contact parts made of stainless steel 0-20kg.

Bottle Cap Sealing Machine

Bottle Cap Sealing Machine Hand Operated : (P-B4) P-B4: Bottle Cap Sealing Machine : Portable, hand operated equipment with two extra cap holders of different sizes. Totally casted machine hand operated. Hand operated.

Disintegrator .

Disintegrator : (P-D2) Highly polished hooper dia 2". Completed with suitable motor to work on 220V AC 50Hz single phase. Fitted with 4 steel hammers fixed to a disc of dia. 1" through which passes a shaft being revolved at the speed of approximately 3000 RPM. Hammers are enclosed in a drum. The lower portion can be fitted with different mesh screens (sieves)-coarse, medium or fine supplied with the equipment.

Digital Rheometer

Digital Rheometer (Cat No. - P-R3) Feature and Benefits of Digital Rheometer Sophisticated Rheometer with continuous sensing and display. Stand-alone programming: Enter data, temperature requirements, start program, see results on built-in display. Computer programmable using optional Rheocalc 32 software lets you control all aspects of rheological testing directly from the computer. The tool to easily predict a materials flow, spray or pumping behaviour by studying shear rate profiles. Has built-in math models for data analysis in stand-alone mode, eg. Casson. Complete with appropriate spindles, Rheoloader program, power base, guard leg and carrying case. Accuracy: 1.0% of range Repeatability: 0.2%.

Capsule Filling Machine

Capsule Filling Machine : (P-C4) Capsule Filling Machine : A compact hand operated machine suitable to fill two-part hard gelatine capsules. Main body made of heavy cast iron and all contact parts made of brass richly plated or stainless steel. Handle locking arrangement makes the operator to lift the loading plate without fear of damaging the capsules. Pressing is achieved by cam system which also saves time to press the plunger as compared to screw system. Plate of stainless steel for any one no. Is supplied with machine. For filling 100 capsules.

Disintegration Test Machine

This electrically operated Disintegration Test Machine is used for finding out disintegration of tablets. The test machine complies with specifications based on the Indian pharmacopoeia 1985:- This instrument accurately estimates disintegration time of tablets/capsules. It is enclosed in painted sheet metal cabinet with chemical resistant epoxy coating. It is fitted with constant speed, sturdy motor. The guide discs and strokes conform to pharma copoeial standards. Drive : 1/8 HP Heater : 125 watt Power : AC/230 volt Single Phase. Displacement : 50 to 60mm RPM : 28 - 32 AVAILABLE IN With single basket With double basket

Tablet Making Machine Motorised

Tablet Making Machine (Motorised) : Hammer type and provided with suitable motor, workable on 220V AC 50Hzsingle phase. Optional : Spare punch & die of chrome steel of 6, 9 & 12mm Note : Ask for rotary tablet machine.

Telethermometer .

Telethermometer Electro-Medical Apparatus also known as Telethermometer (digital) : It consist of six channels to measure the temperature. Channels are selectable via switch on the panel. Show one temperature at a time with six probs

Rabbit Holder

Rabbit Holder (P-R2) Rabbit Holder (Wooden): Wooden, box-type, front top lid opening, air-window push system and neck holding arrangement.

Tablet Counter

Tablet Making Machine Electrically Operated

Suppository Mould

Suppository Moulds P-S3 Suppository Moulds : These are usually made from brass available as below ; 2 moulds (1, 2, 3, or 4 gr.) - Any one size 4 moulds (1, 2, 3, or 4 gr.) - Any one size 6 moulds (1, 2, 3, or 4 gr.) - Any one size 8 moulds (1, 2, 3, or 4 gr.) - Any one size 12 moulds (1, 2, 3, or 4 gr.) - Any one size

Microprocesser Disintegration Test Apparatus

Microprocesser Disintegration Test Apparatus : (P-D1B) Features: Complies with USP, IP specifications Extremely useful for pharmaceutical labs Highly Accurate and Easy to Operate Baskets & DOWN movement as per IP/USP Specifications : 20 x 4 Line Alphanumeric LCD with Backlit 15 Soft Touch Membrane Type Keys 20 Setups Storage Facility 200 Samples Storage Facility Printer Attachment Facility Audio Visual Indicators for System Status.

Bottle Washing Machine

Bottle Washing Machine : Washing tank made of stainless steel mounted on sturdy square ms pipe frame duly powder coated, motorized driven unit embedded in a metallic box rested on the main unit with a drill check to accommodate various size of washing brushes. Workable on 220V-50Hz AC mains.

Lipstick Molds

Lipstick Molds : P-L2 Lipstick Molds is made of brass available in 4 holes & 6 holes.

Tincture Press

Tincture Press : (P-T8) Capacity 1 litre vessel and contact parts made of stainless steel sheet duly perforated. Complete with screw press.

Jar Test Apparatus

Jar Test Apparatus Jar Test Apparatus:It has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water. It consist of electronically controlled variable speed electronic motor with timing belt driven mechanism. Speed controller is provided to control the speed of four/six stirrers from 5 to 150 RPM. Stainless Steel/ Brass paddles are provided.

Dissolution Rate Test Equipment

Microprocssor based with digital temperature controller Digital revolution with R. P. M. Setting. Digital temperature controller. Digital timer. Motorised up and down of the total stiring unit. A stainless steel basket is provided to hold samples. The machine works on 220V AC 50Hz single phase. A. Three tests B. Six tests C. Eight tests

Friability Test Apparatus

Microprocessor Friability Test Apparatus : (P-F1A) With digital preset revolution counter. The instrument will stop after set revolutions. (a) Single drum. (b) Double Drum.

Small Animal Cage

Small Animal Cage Small Animal Cage: Made of steel body duly powder coated or stainless steel. With feeding bottle and feeding bowl, the removable waste collecting tray below the cage size : 18 x 18 x 14 18 x 18 x 20 24 x 24 x 18 Note : Rack for above at extra cost.

Plythesmography .

Plythesmography Plythesmography: It is a simple apparatus containing mercury to study the anti-inflammatory properties. The mercury displacement due to dipping of the paw can be directly read from the scale attached to the mercury column.

Cone Blender

Cone Blender Cone Blender (Double cone blender): It consists of two stainless steel cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand. Drive is by means of an electric motor & reduction gear box through a centre shaft. The cone is mounted on plummer blocks for easy movement there by ensuring through mixing. To facilitate easy movement of the cone while charging and discharging of the large units, a special inching arrangement is provided with the unit motor used are single phase. Capacity : a) 5 kg. b) 10 kg.

Sterility Test Apparatus

Sterility Test Apparatus : It consists of stainless steel flask with stainless steel clamps and stainless steel support screen made out stainless steel 316 quality. Features: Reliability. Highly accurate. Corrosion resistant. Maintenance free. Capacity Available: Single station without stand. 3 station with stainless steel stand. 6 station with stainless steel stand.

Hand Grind Mill

Hand Grind Mill Complete on metallic stand having adjustable arrangement for making coarse & fine powder.

Ointment Slab

Ointment Slab Ointment Slab is made from imported perspex sheet (graduated) Sizes Available : 6" x 6" and 8" x 8".

Filtration Assembly

Filtration Assembly( Filter Press) All contact parts made of stainless steel and comprises of following components : Pressure vessel stainless steel cap. 20 lit. & 6 or 8 disc plates Motor compressor. Deep and shallow stainless steel filter plates Filter media . Stainless steel pump and pipes. Filter cartridge assembly Stainless steel top cover Perforated screens Interlocking cups Stainless steel trolley

Ball Mill

Ball Mill :(P-B6) Electrically operated, motor driven made of stainless steel. Speed control. Capacity :1 litre mill made of stainless steel 2 litre mill made of stainless steel

Blender .

Blender :(P-B5) Electrically operated with speed control device with three stainless steel jars of different sizes. Jars : 3 Stainless Steel Jars. Motor power (w) : 550 W. Revolution : 18000 RPM. Power requirement : 230 V,50 Hz.

Ampoule Washing Device

Ampoule Washing Device :(P-A5) Pan made of stainless steel 6 nos. Nozzles made from brass richly chrome plated and tap to connect water from out side.

Cannulae .

Cannulae Cannulae : Borosil Glass Arterial Venous Syme Perfusion T-Shaped

Dissolution Rate Test Equipment

Dissolution Rate Test Equipment : P-D31 Same as P-D3 But with following parameter: Digital temperature controller cum indicator. Digital RPM indicator Avaialble in: A. Single test. B. Combined unit for 3 tests. C. Combined unit for 6 tests.

Tablet Coating Pan

Friability Test Apparatus

Digital Friability Test Apparatus is a precision instrument suitable for measuring abression strength of tablets. The unit is equipped with transparent acrylic drums which rotate at a speed of 25 ± 1 rpm. Acrylic drums are provided with an arm which carries the tablets along with it up to a predetermined height and allows them to fall from that specified height, while the drums are rotatin. Provision is made to remove the lid of the acrylic drum by unscrewing just one knob. Manual Timer. (a) Single drum. (b) Double Drum.

Microprocessor Based Dissolution Test Apparatus

Microprocessor Based Dissolution Test Apparatus Specifications General Display 20 x 4 Line Alphanumeric LCD display with Backlit Keyboard 19 soft touch membrane keys LED 6 LEDs, 3 LEDs for Test status like Run, Alarm, End and 2 LEDs for Platform up/down status and one for heater ON/OFF status. Prog. Mode Routine, Sustain and Control mode. Facility for 20 different test setups available in Routine and Sustain mode. Printer Provision for the attachment of dot-matrix printer with centronics parallel port interface available. Stirrer Speed 25 - 200 RPM, ± 1 RPM Resolution 1 RPM Accuracy ± 1 RPM Temperature Range 30 - 50 C Accuracy + 1 C Temp. Control Microprocessor Based using PT100/Semiconductor Sensor Sampling Reaction Vessel 1000 ml jars with stirrer pedals and baskets Heater 1 KW Power 230 V ± 10%, 50 Hz. AC Accessories Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1) External Temperature Sensor (T2) for Vessel Reaction Vessel capacity 1000 ml (8 Nos. in Model - 1918 and (6 + 1) Nos. in Model - 1916) Round Acrylic Cover Plate with Hole and a large slit (8 Nos. in Model - 1918 & 6 Nos. in Model - 1916) S.S. Paddle, S.S Wire Mesh Basket (8 Nos. in Model - 1918 & 6 Nos. in Model - 1916) Glass pipettes with rubber bellows Mains Lead Instruction Manual Dust Cover

Dissolution Rate Test Equipment

Dissolution Rate Test Equipment Dissolution Rate Test Equipment : This equipment is used to determine dissolution rate of tablets and complies with US-Pharmacopoeia-XVII standard with water constantly moving and holding temp. constant at 37 C ± 0. 5 C throughout the test. A 1000 ml capacity cylindrical vessel with flanges near the top is provided to accept 4 parts cover. Motor speed is controlled by a speed controller within a range of 25 to 150 RPM. A stainless steel basket is provided to hold samples. The machine works on 220V AC 50Hz single phase. Single test Combined unit for 3 tests. Combined unit for 6 tests.

Antibiotic Zone Reader

Antibiotic Zone Reader Antibiotic Zone Reader : The Antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri dish. This zone reader measures the diameter of the inhibited zone to 0.02mm with the range of 0 to 35mm. It works on 220V AC 50Hz.

Disintegration Test Machine

Disintegration Test Machine : (P-D1A) The shaft moves up and down by 50to 60mm at speed of 28-32 strokes per minute. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Two independently thermostatically controlled hot plate rating 125 watt are fixed on the top of the cabinet upon which beakers of 1000 ml size are placed filled with water. Temperature is maintained at 37C with and accuracy of 1C independent switches with neon indicators for motor hot plates are fitted on a panel. Mains fuse with two meters mains cord and plug provide work on 220 volt A.C. Mains. With digital temperature controller cum indicator and digital timer. AVAILABLE IN With single basket With double basket

Conical Percolator

Conical Percolator:- Stainless steel jar on stand. Capacity : 500ml, 1 lit. and 2 lit.

Ampoule Filling And Sealing Device

Ampoule Filling & Sealing Device Ampoule Filling & Sealing Device : Electrically operated with piston of syringe having adjustment for quantity of liquid to be filled. Completed with burner for sealing.

Membrane Filter Holder

Membrane Holder Diameter 25 / 47mm Buchner funnel of stainless steel Vacuum flask of borosilicate glass Membrane Filter Holder, With Neoprene Lid and Stopper, C-type Handle-clamp. Membrane Filter Holder, With SS Lid with vent, C-type Handle-clamp. Membrane Filter Holder, With Neoprene Lid and Stopper, and SS Duck Clamp.

Filtration Assembly

Filtration Assembly: Kit comprises of: All Glass Membrane Filter Holder, Borosilicate Glass, 47mm, with Sintered disc for membrane support and aluminum duck clamp. Vacuum Pump, Compact and efficient. Silicon Rubber Tubing 6x9mm -1 mtr. Pack of 100 Membranes, 47mm.

Granulating Sieves

Granulating Sieves : Wooden frame sizes:9" x 7"&10" x 8" Reinforced by stainless steel strips.

Tube Crimping Machine

Propeller Type Mechanical Agitator

Laboratory Wiley Mill

Laboratory Wiley Mill Laboratory Mill (Wiley type) : For preparation of samples for analysis with minimum loss of moisture of volatile constituents. Weight distribution and balancing of rotating parts has been adjusted to provide greater stability and quieter performance with reduced vibration. Suitability for wider variety of commercial materials. fitted with 1/4 HP motor, supplied with nickel plated hopper of 50mm diameter with cover, three delivery sieves, having tops of 20, 40 and 80 mesh respectively, with plastic receiver, brush, L-N key, cord and plug. Suitable to operate on220V,1Phase,50Cycles AC supply.

Hammer Mill

Hammer mill is a economical unit designed for general all-round work for time saving operation. Most often, the only changes necessary are of Screens, hammers and liners. Feed Material passes through a wide feed hopper into the grinding chamber. The swinging hammers, in the rotating hammer rotor, crush materials at the stationery liners before driving them trough a screen and type of hammers used. The method of operation is impact grinding. Combination of different hammer styles, liner plates, sieve inserts and wear resistance technology offer almost unlimited possibilities of crushing lumpy, bulky, irregularly shaped, hard & fibrous materials, into coarse to medium fine powder. Machine to work on 220V AC 50 Hz single phase.

Collapsible Tube Ointment Filling Machine

Collapsible Tube / Ointment Filling Machine (P-C3) Collapsible Tube / Ointment Filling Machine : Stroke type machine. Filling capacity adjustable 5 gm to 50 gm. Detachable nozzles provided for each capacity. Hooper and contact parts made of stainless steel.

Sietz Filter

Sietz Filter (P-S4) : Sietz Filter : For use with filter pads clarification and sterilization Seltz filters made from solid stainless steel bar are specially designed for effective filteration of all types of liquid in various laboratories, when filter pads are employed with they remove all matters and even particle of cellodie nature liquids. Available in following capacities : 14 cm to take 140 mm filterpad cap. 500 ml. 6 cm to take 60 mm filterpad cap. 60 ml. 3 cm to take 30 mm filterpad cap. 30 ml. Filter pad of 25 Nos. : 3 cm., 6 cm. and 14 cm.

Tablet Hardness Tester

Anderson Pipette

Anderson Pipette (Cat No : P-A7) Anderson Pipette : Particle size determination apparatus, (sedimentation pipette, andrerson) consisting of 500ml. Graduated cylinder, graduation from 0 to 20cm and fitted with 10rni.Pipette with three way stopcock, the tip of pipette at the level of 0 mark at the cylinder.

Sigma Blade Mixer

Sigma Blade Mixer Specification: Used for mixing of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, appl Application & Process: The Sigma Mixer is used for mixing and kneading for mixing, kneading of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses. Total Capacity Working Capacity Liters Liters 8 3- 5 75 35-50 150 70-100 225 110-150 300 150-200 450 225-300 600 300-400 800 400-500 1100 500-750 1400 700-1000

Rotary Vacuum Flash Evaporator