Longitudinal Compressometer

Product Description

Longitudinal Compressometer: MTCT-120

It is designed for finding out the deformation and strains on cement and concrete cylinders when subjected to compressive loads.

TECHNICAL SPECIFICATION

• Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compress meter over the cylinder.
• A dial gauge 0.002mm x 12mm is mounted on the upper ring and the tip of the dial gauge rests on an anvil.
• The zero on the dial gauge can be set by adjusting the anvil screw.
• For 150mm dia x 300mm high specimen.
• Spacer holds the two frames in position.
• A pivot rod rests on pivot screws.
• A dial gauge, fixed to a bracket fitted to the top frame is used for taking deformation measurement.
• Supplied complete with dial gauge 0.002mm x 5mm in a nice wooden carrying case.
• Note:-The content of the product and specification are subject to change without prior notice for continuous improvement. Images shown are for representation purpose only. “MICROTEKNIK keeps the right to modify the content in the product without prior notice.